Garbage Disposal
Garbage Disposal | Garbage Disposal Repair | Plumbing | Ten Mile
When your Ten Mile kitchen falls silent because the disposal won’t spin—or worse, roars with a tell-tale grind—count on HEP’s master plumbers to bring back the hum. Our licensed team diagnoses clogs, leaks, and electrical hiccups in minutes, arriving in fully stocked trucks so most fixes happen on the first visit. From freeing jammed impellers to replacing worn seals, we restore safe, efficient operation while protecting your pipes and the planet.
Choose HEP for dependable garbage disposal repair backed by transparent pricing and a 100% satisfaction guarantee. We’re local, we answer the phone 24/7, and we treat your home with the care it deserves—shoe covers on, messes gone, and a freshly tested disposal ready for your next dinner prep. Schedule today and discover why Ten Mile homeowners have trusted HEP for decades.
FAQs
How can I tell whether my garbage disposal in Ten Mile needs repair or full replacement?
If the unit is less than 7–10 years old and the problem is limited to jams, minor leaks, or a burned-out motor capacitor, a repair is usually cost-effective. Persistent leaks from the housing, frequent resets, or a corroded grinding chamber generally indicate it’s time for replacement. Our technicians can inspect the unit on-site and give you an honest recommendation within minutes.
What are the most common causes of jams and clogs in a garbage disposal?
Stringy foods (celery, corn husks), starchy scraps (potato peels, pasta, rice), large bones, grease, and non-food items are the leading culprits. These materials either wrap around the impellers or swell and block the drain line. Running the disposal without enough cold water also increases the risk of jams. We advise feeding waste in small batches with the water running for 20–30 seconds after grinding to flush the line.
Is it safe to use chemical drain cleaners in my disposal when it’s clogged?
No. Caustic drain cleaners can damage the rubber splash guard, corrode metal components, and void most manufacturers’ warranties. They also create hazardous fumes when trapped in the grind chamber. Instead, turn off the power, try the provided hex wrench on the bottom of the unit to free the flywheel, and call our Ten Mile service team if the clog persists. We use professional augers and bio-enzyme cleaners that won’t harm the disposal or piping.
What should I do if the disposal hums but the blades don’t spin?
A humming sound means power is reaching the motor but the flywheel is stuck. First, switch the unit off, then press the reset button on the bottom. If it still hums, insert a ¼-inch Allen (hex) wrench into the center socket underneath and turn it back and forth to free the jam. Never place your hand inside the chamber. If the reset repeatedly trips or the motor won’t turn after freeing the jam, call us—continued humming can burn out the motor winding within minutes.
How quickly can you get a technician to my home in Ten Mile for garbage disposal repairs?
Because we’re locally based, we offer same-day service for most calls placed before 2 p.m. and 24/7 emergency response for severe leaks or complete kitchen downtime. Our fully stocked vans carry replacement splash guards, motors, and new disposal units, so 90% of repairs are completed in a single visit. You’ll receive a text with the technician’s ETA and a photo for security.
What does a typical garbage disposal repair cost in Ten Mile?
Minor fixes such as unjamming, replacing a splash guard, or resetting an overload usually range from $85 to $150, including the service call. Motor capacitor replacement or extensive leak patching typically runs $150–$250. If the unit needs to be replaced, we offer standard disposals starting at $325 installed, with premium quiet-grind models available. All pricing is quoted upfront after diagnosis, and we waive the diagnostic fee if you proceed with the repair.