Reverse Osmosis
Reverse Osmosis | Water Purification | Plumbing | Tellico Plains
Enjoy mountain–fresh flavor from every tap with HEP’s reverse osmosis solutions in Tellico Plains. Our certified plumbers install multi-stage membranes that strip away sediments, chemicals, and lingering odors, leaving nothing but pure H₂O. Whether you’re filling a kettle, rinsing produce, or mixing baby formula, you’ll taste the difference that true water purification delivers.
From the first consultation to routine filter changes, HEP handles everything with hometown courtesy and big-city expertise. We size each system to your household, tuck it neatly under the sink, and back the installation with a rock-solid guarantee—so you can savor crystal-clear confidence for years to come. Ready to raise a glass to cleaner living? Give us a call and let Tellico Plains’ trusted plumbing team bring pristine water straight to you.
FAQs
What makes reverse osmosis (RO) the best choice for water purification in Tellico Plains?
RO systems force water through a semipermeable membrane that removes up to 99% of dissolved salts, lead, nitrates, PFAS, and other contaminants. Tellico Plains’ water often contains naturally occurring minerals from the surrounding foothills and occasional agricultural runoff; an RO unit provides a multi-stage barrier that specifically targets these local impurities while still delivering fresh-tasting water.
Will an RO system remove the ‘hardness’ and sulfur odors sometimes noticed in Tellico Plains tap or well water?
Yes. Although hardness (calcium and magnesium) and hydrogen sulfide gas are not hazardous, they can cause scaling and unpleasant smells. The carbon pre-filter in an RO system adsorbs odors, and the membrane reduces hardness by more than 90%. For severe sulfur smells or iron staining, we may pair RO with a whole-house pre-treatment unit for complete protection.
How much space and plumbing modification will an under-sink RO unit require?
A typical 4- or 5-stage RO unit measures about 15" H × 15" W × 5" D, plus a 3–4 gal pressurized storage tank (11" D × 14" H). Installation usually involves: 1) fastening the manifold to the cabinet wall, 2) tapping the cold-water supply line with a saddle or angle stop valve, 3) attaching a dedicated RO faucet on your sink or countertop, and 4) routing a ¼" drain line to the sink’s tailpiece. Most Tellico Plains homes have ample under-sink space, and our plumbers can complete the retrofit without altering existing countertops.
How often do I need to change filters and the membrane?
For average Tellico Plains households using 2–3 gal/day of RO water, we recommend replacing: • sediment and carbon pre-filters every 6–12 months; • the RO membrane every 2–3 years; • the post-carbon polishing filter annually. High turbidity well water or elevated chlorine/chloramine levels can shorten these intervals. We offer affordable service packages, or you can DIY with snap-in cartridges.
What is the average cost to install and operate an RO system here?
Installed cost for a premium under-sink RO system ranges from $450–$750, including parts, labor, and the dedicated faucet. Annual operating cost is typically $50–$100 for replacement filters and about $0.05–$0.10 per gallon in water and wastewater charges—far less than bottled water and with zero plastic waste.
Does an RO system waste water, and are there eco-friendly options?
Traditional RO units discharge 3–4 gallons of reject water per gallon of purified water. However, modern high-efficiency systems we install in Tellico Plains use permeate pumps or 1:1 recovery membranes, cutting waste by up to 80%. You can also route the brine line to a garden or non-potable holding tank for reuse if local codes permit.