Touch-free Faucets
Touch-free Faucets | Plumbing Fixture Replacements | Plumbing | Rutledge
Imagine turning on the water with a simple wave—no handles to twist, no germs to spread. HEP’s touch-free faucets bring that effortless experience to homes and businesses across Rutledge, blending modern sensor technology with trusted local craftsmanship. From kitchens that buzz with family activity to bathrooms that need an extra layer of cleanliness, our licensed plumbers install sleek, water-saving fixtures that elevate both style and sanitation.
Along with new installs, we specialize in plumbing fixture replacements, swapping out dripping, outdated faucets for fresh, touch-free models in a single, streamlined visit. You’ll enjoy lower water bills, fewer maintenance headaches, and the confidence that comes from a job handled by Rutledge’s most dependable plumbing team. Ready to upgrade? Give HEP a call and feel the difference the very first time you wave your hand.
FAQs
What exactly is a touch-free faucet and how does it work?
A touch-free (or hands-free) faucet uses an infrared or capacitive sensor to detect the presence of your hands. When the sensor is triggered, an electronic solenoid valve opens and water flows; when you remove your hands, the valve closes automatically. These faucets are powered either by long-life batteries or a low-voltage power supply that can be plugged into a nearby outlet.
Why should I choose a touch-free faucet for my Rutledge home or business?
Touch-free faucets reduce the spread of germs, cut down on water waste, and add a modern look to kitchens and bathrooms. In commercial settings, they can help you meet local health-department recommendations for hygiene, and in homes they are convenient for young children, seniors, or anyone with limited mobility. Our plumbing team in Rutledge installs models that meet Georgia’s low-flow requirements, so you gain both health and environmental benefits.
Will a hands-free faucet really lower my water bill?
Yes. Because the water only runs while the sensor is activated, touch-free faucets can use up to 70 % less water than a standard manual faucet left running during hand-washing or dish-rinsing. Many models we install in Rutledge flow at 0.5–1.0 gpm, compared to the 2.2 gpm of older fixtures. Over a year, that can translate into noticeable savings on both water and water-heating costs.
Can a touch-free faucet be installed on my existing sink or counter?
In most cases, yes. Most modern touch-free faucets fit a standard single-hole or 4-inch center-set configuration. If your sink currently has multiple holes, we can provide an escutcheon plate to cover the extras. During our free on-site evaluation in Rutledge, we check clearances, power availability, and supply-line compatibility to confirm the best model for your setup.
What is involved in replacing my old faucet with a touch-free model, and how long does it take?
A typical replacement visits goes as follows: (1) shut off water, (2) disconnect supply lines and remove the old faucet, (3) clean the deck surface, (4) position the new touch-free faucet and secure mounting hardware, (5) connect hot and cold lines to the solenoid box, (6) connect power (battery pack or transformer), and (7) test and adjust flow and sensor range. For most residential sinks, the process takes 1–2 hours. Commercial installations with multiple fixtures can be completed overnight to avoid business downtime.
Do touch-free faucets need special maintenance and what if the sensor stops working?
Routine care is simple: wipe the sensor lens with a soft cloth to keep it free of soap film and mineral buildup, and replace batteries (if applicable) every 18–24 months. The cartridges inside the faucet are similar to those in manual versions and can be serviced the same way. Our Rutledge plumbers carry OEM parts, and our installations come with a one-year labor warranty plus the manufacturer’s 3–5-year parts warranty. If the sensor ever fails, the solenoid automatically shuts the water off so you avoid leaks while we arrange a repair or replacement.