Dual-flush Designs
Dual-flush Designs | Toilet Upgrades and Replacements | Plumbing | Pioneer
Discover how HEP’s sleek dual-flush toilets merge smart engineering with eco-friendly performance, delivering powerful rinses while saving thousands of gallons a year. Our licensed plumbers in Pioneer handle every detail—from removing your old fixture to fine-tuning the new water-saving valves—so you enjoy quieter fills, cleaner bowls, and lower utility bills without lifting a wrench.
Whether you’re planning bathroom renovations, boosting a property’s resale value, or simply tired of constant clogs, our toilet upgrades and replacements service gives you a fast, mess-free path to a modern throne. Schedule today and feel the difference every time you press the chrome button: a lighter tap for liquids, a stronger surge for solids, both engineered by HEP to keep Pioneer’s plumbing running clear.
FAQs
What is a dual-flush toilet and how does it differ from a standard toilet?
A dual-flush toilet offers two separate flush options: a low-volume (usually 0.8–1.1 gpf) button for liquid waste and a full-volume (1.28–1.6 gpf) button for solid waste. Traditional single-flush toilets release the same amount of water—often 1.6 gpf or more—no matter what is being flushed. The dual-flush mechanism significantly reduces average water use without sacrificing performance, making it an eco-friendly upgrade for Pioneer homeowners.
How much water and money can I actually save by upgrading?
Switching from a 3.5 gpf or older 1.6 gpf toilet to a WaterSense-certified dual-flush model can cut toilet water use by 40–70 %. For a family of four, that’s roughly 12,000–16,000 gallons per year—about $70–$110 in annual water and sewer charges at typical Pioneer utility rates. Over the 20-year life of the toilet, savings can exceed $1,500, easily offsetting the cost of the upgrade.
Can my existing plumbing accommodate a dual-flush replacement?
In almost every case, yes. Dual-flush toilets fit the same 12-inch rough-in used by standard toilets, and they connect to the same water supply. We inspect the flange, shut-off valve, and supply line during our free in-home estimate. If minor adjustments are needed—such as replacing an old corroded valve or installing a flange spacer for taller floors—we’ll include those items in your quote so there are no surprises on installation day.
What does the installation process involve and how long will it take?
A typical replacement takes 1½–2 hours. Our licensed plumber will: 1) shut off and drain the old toilet; 2) remove the fixture and examine the flange; 3) install a new wax ring or leak-proof seal; 4) set and level the dual-flush bowl; 5) attach the tank (if a two-piece model); 6) connect the supply line, adjust flush volumes, and test for leaks; 7) haul away the old toilet for environmentally responsible disposal. We protect your floors with drop cloths and clean the workspace before leaving.
Are dual-flush toilets harder to maintain or more prone to clogs?
Modern dual-flush designs use larger, glazed trapways (up to 2-1⁄8") and pressurized or siphonic bowl shapes that actually reduce clog risk compared to many older toilets. The push-button actuators have few moving parts and are easy to access from the tank top. Should service ever be required, replacement seals and buttons are inexpensive and readily available. Routine care—an occasional wipe-down of the buttons and avoiding in-tank cleaners—is all that’s needed.
Do Pioneer residents qualify for rebates or incentives when installing a dual-flush toilet?
Yes. Pioneer Municipal Utilities currently offers a $50 bill credit for each WaterSense-labeled high-efficiency or dual-flush toilet replacing a pre-1994 model (3.5 gpf or higher). To claim the rebate, submit a copy of your purchase receipt and a photo of the installed fixture within 60 days. We supply the required documentation and can file the paperwork on your behalf upon completion of the job.