Dual-flush Units
Dual-flush Units | Toilet Upgrades and Replacements | Plumbing | Old Fort
Ready to trade clunky, water-guzzling commodes for sleek dual-flush efficiency? HEP’s licensed plumbers in Old Fort specialize in smart toilet upgrades and replacements, installing modern units that let you choose a light or full flush with a single, stylish button. You’ll cut your water bill, reduce your environmental footprint, and enjoy whisper-quiet performance—all backed by our prompt scheduling and tidy workmanship.
From the moment we arrive, we assess your bathroom’s layout, remove the old fixture, and fit a precision-sealed dual-flush toilet that meets today’s toughest standards. Whether you’re renovating a cozy mountain cottage or refreshing a downtown storefront, our team handles every detail, hauls away debris, and leaves your space spotless. Call HEP today and feel the difference every time you press flush.
FAQs
What is a dual-flush toilet and how does it differ from a standard single-flush model?
A dual-flush toilet offers two separate flushing options: a low-volume flush (usually 0.8–1.1 gallons) for liquid waste and a full-volume flush (1.28–1.6 gallons) for solid waste. Unlike traditional single-flush toilets that use the same amount of water for every flush, a dual-flush system allows homeowners in Old Fort to reduce overall water consumption by up to 50 %. This not only lowers monthly utility bills but also helps the town meet state and local water-conservation goals.
Will a dual-flush upgrade fit my existing rough-in and plumbing connections in Old Fort homes?
Most homes in Old Fort have a standard 12-inch rough-in distance from the wall to the center of the closet flange, and the majority of modern dual-flush bowls are designed to match that specification. If your bathroom has a 10-inch or 14-inch rough-in—or if the flange is corroded or offset—we can supply specialty dual-flush models or install an offset flange adapter. During our free on-site assessment we measure the rough-in, inspect the shut-off valve, check floor integrity, and confirm venting to ensure seamless compatibility before we schedule installation.
How much water and money can I realistically save by switching to a dual-flush unit in Old Fort?
An older 3.5-gallon toilet averages roughly 12,000 gallons of water use per person each year. Upgrading to a WaterSense-certified dual-flush unit can cut that figure to about 4,500–6,000 gallons. In dollar terms, a family of four can expect to save 60–90 dollars annually on McDowell County water and sewer charges. Over the 20-year lifespan of a high-quality toilet, those savings can exceed the cost of the unit and installation several times over.
Do I need a plumbing permit or inspection for a toilet replacement in Old Fort?
In most cases, replacing a toilet in an existing bathroom is considered a like-for-like fixture swap and does not require a building permit in McDowell County. However, if the project involves moving the drain line, altering structural members, or modifying supply lines behind finished walls, the county may require a residential plumbing permit and inspection. Our licensed plumbers stay current with North Carolina Plumbing Code and will handle any permitting paperwork if it becomes necessary, ensuring your upgrade is fully compliant.
What is the typical installation timeline, and will my bathroom be out of service for long?
A straightforward dual-flush replacement takes about 1.5–2 hours, including removal of the old toilet, inspection of the flange and wax ring, installation of the new bowl and tank, and a full leak test. Your bathroom will be out of service only during this window. If flange repair, subfloor patching, or supply-line relocation is required, the project may extend to half a day, but we always provide a time estimate beforehand and protect surrounding flooring and fixtures during the work.
What maintenance does a dual-flush toilet require and how reliable are the push-button mechanisms?
Dual-flush units use canister or tower valves instead of traditional flappers, which reduces the chance of leaks caused by worn rubber. Routine maintenance involves occasionally cleaning the valve seal, ensuring the fill-valve screen is free of sediment, and checking that the buttons or actuator plate move freely. These parts are designed for 250,000+ cycles, and replacement kits cost about the same as standard flappers. We provide a two-year labor warranty and register your product for the manufacturer’s 5–10-year parts warranty, giving you long-term peace of mind.