Reverse-osmosis Systems
Reverse-osmosis Systems | Water Purification | Plumbing | New Tazewell
Nothing beats turning on the tap in New Tazewell and knowing that every glass is crisp, clear, and safe. HEP’s licensed plumbers install high-performance reverse-osmosis systems that strip away lead, chlorine, PFAS, and other hard-to-pronounce contaminants, giving your family bottled-water quality straight from the sink. Our compact units fit neatly under the counter, and smart-monitor faucets let you see real-time purity levels—so you’re never left guessing about the water you drink, cook with, or mix into baby formula.
From the first free water test to scheduled filter changes years down the road, we handle every detail of your water purification journey. Local technicians arrive on time, respect your home, and back their work with HEP’s satisfaction guarantee. Enjoy softer skin, brighter coffee, and spotless dishes—then share the secret with your neighbors: superior comfort starts with superior water.
FAQs
What contaminants can a reverse-osmosis (RO) system remove from New Tazewell’s municipal or well water?
A properly sized RO membrane paired with carbon and sediment pre-filters can cut 95–99 % of dissolved solids and many hazardous contaminants found in Claiborne County water reports or private wells. These include lead leached from older service lines, chlorine and chloramine taste/odors, agricultural nitrates, pesticides such as atrazine, fluoride, arsenic, barium, chromium-6, pharmaceuticals, and hardness minerals (calcium, magnesium) that cause scale. Because the membrane’s pore size is about 0.0001 microns, it also rejects microbes like Giardia and Cryptosporidium, providing an extra safeguard during boil-water advisories.
How is an RO system installed in my New Tazewell home’s plumbing?
Most residential RO packages are under-sink units. Our licensed plumbers begin by shutting off the cold-water angle stop, adding a feed-water adapter, and mounting sediment and carbon pre-filters, the RO membrane housing, post-filter, and 3–4 gal pressurized storage tank in the sink base. A dedicated drinking-water faucet is bored through the countertop or existing sprayer hole. The drain-line saddle is clamped to your sink’s drainpipe for brine discharge. For refrigerators or ice makers, we run ¼-in. tubing from the tank to the appliance. Typical installation takes 2–3 hours and does not require major cabinet modifications.
What routine maintenance does the system need, and how often?
1) Sediment filter: replace every 6–12 months to protect the membrane from silt found in well or creek-influenced sources. 2) Carbon block(s): swap every 6–12 months to keep chlorine/chloramine from degrading the membrane. 3) RO membrane: with New Tazewell’s average 150–250 ppm TDS, membranes usually last 3–5 years; we test TDS yearly and change when rejection falls below 80 %. 4) Post-carbon or remineralizer: change annually for fresh taste. Sanitizing the storage tank and housings with a food-grade disinfectant once a year prevents biofilm. Our service plan sends reminders and offers discounted filter bundles.
How much water does an RO system waste, and are high-efficiency options available?
Traditional 4-stage units create about 3 gallons of brine for every gallon of purified water (a 3:1 ratio). Because New Tazewell water pressure averages 55–60 psi, we can install 1:1 or 2:1 high-efficiency membranes or add a permeate-pump upgrade that uses the tank’s back-pressure to cut waste by up to 80 %. The brine line still meets plumbing code by discharging above the P-trap to prevent cross-connection.
What does a complete RO system cost in the New Tazewell area?
Equipment: A certified 5-stage NSF-listed system ranges from $300–$600 depending on capacity and extras like remineralization or UV. Labor: Local installation runs $200–$350 for a standard under-sink setup; fridge line adds about $75. Annual filters average $60–$120, and a replacement membrane is $75–$100 every few years. Many homeowners end up paying roughly $0.20–$0.35 per gallon of drinking water over the first five years—far less than bottled water delivered to rural addresses.
Will an RO system affect my home’s water pressure or taste?
Only the dedicated RO faucet and any connected fridge line use purified water; the rest of your plumbing remains unchanged. The pressurized storage tank delivers 30–40 psi at the faucet, which is comparable to a refrigerator dispenser. As for taste, RO removes nearly all dissolved minerals, leaving water very “soft.” Most customers prefer the crisp, neutral flavor, but if you like the slight mineral bite of spring water we can add a food-grade calcium/magnesium polishing cartridge to restore healthy minerals and bring pH up to 7.5-8.0.