Whole-house Carbon System
Whole-house Carbon System | Water Purification | Plumbing | Mulberry
Imagine turning on any tap in your Mulberry home and being greeted by crisp, fresh-tasting water that’s free from chlorine, sediment, and the lingering odors that plague municipal supplies. HEP’s whole-house carbon system integrates seamlessly with your existing plumbing, using high-capacity activated carbon to polish every drop before it reaches your shower, dishwasher, or ice maker. It’s the same dependable quality you expect from HEP, now elevated to protect your family, your appliances, and even your skin and hair—without the waste or hassle of bottled alternatives.
Backed by local technicians who know Mulberry’s unique water profile inside and out, this solution offers effortless maintenance, long filter life, and a noticeable difference you can taste and feel. If you’re ready for household-wide water purification with the ease of “set it and forget it,” HEP’s whole-house carbon system is the smart, sustainable upgrade that keeps your home flowing clean and worry-free.
FAQs
What is a whole-house carbon filtration system and how does it work?
A whole-house carbon system is a single treatment unit installed on your main water line, usually just after the meter or pressure tank. As every gallon of water enters your home, it flows through a large bed of activated carbon granules. The carbon has millions of microscopic pores that adsorb (bond to the surface) chlorine, chloramine, volatile organic compounds (VOCs), pesticides, and many unpleasant tastes and odors. Because the system treats water at the point of entry, every tap—kitchen, bath, laundry, and outdoor spigots—delivers cleaner, better-tasting water.
Which contaminants will the carbon system remove from Mulberry’s water supply?
Activated carbon is exceptionally good at removing or reducing chlorine, chloramine, hydrogen sulfide (rotten-egg odor), many herbicides and pesticides common in Florida groundwater, disinfection by-products like THMs, industrial solvents, benzene, and hundreds of VOCs. It also improves taste, smell, and clarity. Carbon does not significantly remove hardness minerals, nitrates, or dissolved heavy metals such as lead in ionic form, so if those are concerns we can pair the unit with a softener or specialty filter.
Will installing a whole-house carbon filter lower my water pressure?
When sized correctly, pressure loss is minimal—typically 2–4 psi, which most homeowners never notice. We calculate the proper tank diameter and media volume based on your home’s peak demand (number of bathrooms, fixtures, and occupants). For larger homes in Mulberry, we may recommend a 1.5" port or dual-tank configuration to ensure full flow during simultaneous showers, laundry, and irrigation.
How often do I need to replace the carbon media and what maintenance is required?
Unlike small under-sink cartridges, whole-house systems use 1–2 cubic feet of carbon that lasts 5–7 years in most Mulberry households. The control valve automatically backwashes the media to flush out trapped sediment and re-expose fresh carbon surfaces; this cycle happens in the early morning and uses about 50–70 gallons. You simply replace the carbon bed (or have us do it) when it becomes saturated, generally every 60–80 months depending on water quality and usage. No monthly filter changes are needed.
Can I combine a carbon filter with a water softener or reverse-osmosis (RO) unit?
Yes. A typical treatment train for Mulberry homes is: sediment pre-filter → carbon filter → water softener → UV light or point-of-use RO at the kitchen sink. The carbon unit protects downstream equipment by removing chlorine/chloramine that can degrade softener resin and RO membranes, extending their life. We design modular systems so you can add or remove components as your water needs change.
What is involved in the installation and do I need a permit in Mulberry?
A standard install takes 3–4 hours for our licensed plumbers. We shut off the main, cut into the service line, add bypass valves, and connect the tank with NSF-61 approved fittings. The system plugs into a regular 110-volt outlet for its timer. In most cases, Mulberry’s building department does not require a separate permit for in-line filtration devices, but if we must relocate the main or run new electrical, we’ll secure any necessary permits. All work is performed to Florida Plumbing Code and backed by a 10-year warranty on the tank and valve.