Water-saving Toilet
Water-saving Toilet | Toilet Upgrades and Replacements | Plumbing | McDonald
Choosing HEP for your water-saving toilet plumbing in McDonald means enjoying a faster, cleaner, and far more efficient bathroom experience. Our licensed plumbers evaluate your current setup, recommend high-efficiency models, and handle every step—from careful removal of outdated fixtures to precise installation and haul-away—so you can start saving water and money right away. Low-flow flushing, dual-flush options, and leak-proof seals are just a few of the innovations we bring to every home.
Whether you’re renovating an older property or building your dream bathroom from scratch, our team makes toilet upgrades and replacements effortless. We arrive on time, protect your flooring, dispose of old units responsibly, and leave the workspace spotless. Most installations finish within a single visit, letting you enjoy quiet, powerful flushing and reduced utility bills the same day. Book your free, no-obligation consultation and feel the HEP difference.
FAQs
What makes a toilet a “water-saving” or high-efficiency model?
A water-saving toilet is engineered to use 1.28 gallons per flush (gpf) or less—about 20 %–60 % less water than the older 3.5-gpf and 1.6-gpf fixtures still found in many McDonald homes. These fixtures carry the EPA WaterSense label, which certifies they have passed independent performance and efficiency testing. Designs include single-flush high-efficiency toilets (HETs), dual-flush units that offer two flushing volumes for liquids and solids, and pressure-assisted models that boost flush power without extra water.
How much water and money can I expect to save by upgrading my toilet in McDonald?
Swapping one 3.5-gpf toilet for a WaterSense 1.28-gpf unit can save roughly 3,000–4,000 gallons per person per year. For an average family of four that’s up to 13,000 gallons annually—more than a month of typical indoor water use. At McDonald’s average residential water/sewer rates (about $0.01–$0.015 per gallon when combined), those savings translate to $90–$120 a year per upgraded toilet, meaning most customers recoup the purchase and installation cost in two to four years.
Can I install a high-efficiency toilet in my older McDonald home without major plumbing changes?
In most cases, yes. Modern water-saving toilets are designed to fit the standard 12-inch rough-in used in homes built from the 1950s onward. Even if your house has a 10- or 14-inch rough-in, offset flanges or specially sized bowls are available. Our technicians check the existing flange, supply line, and floor condition at the estimate visit; only severely corroded or damaged waste lines would require additional work before installation.
Are there rebates or incentives available locally for water-saving toilet upgrades?
Often. Pennsylvania American Water and surrounding utilities periodically offer $50–$100 bill credits for replacing an older 1.6-gpf or higher toilet with a WaterSense model. The Westmoreland Conservation District and Southwestern Pennsylvania Water Network also run seasonal rebate programs. Because funding windows open and close, we’ll verify current incentives for you and supply all the documentation and model numbers you need to file the rebate paperwork.
How long does a professional toilet replacement take and what does the process involve?
A straightforward removal and replacement typically takes two to three hours. We start by shutting off and draining the existing toilet, unbolting it from the flange, and hauling it to our truck for eco-friendly disposal. We then inspect and, if needed, replace the wax ring or use a modern rubber seal to prevent leaks. Once the new bowl and tank are secured and leveled, we connect the supply line, test flush for proper operation, and apply a tidy bead of caulk around the base. You can use the new toilet as soon as the caulk skins over—usually within an hour.
Do water-saving toilets clog more easily or require special maintenance?
Today’s WaterSense toilets are engineered with larger trapways and refined bowl geometry that actually reduces clog risk compared with many 1990s-era 1.6-gpf models. Maintenance is essentially the same: use non-abrasive cleaners, avoid drop-in tank tablets that can degrade seals, and call a plumber if you notice persistent running or weak flushes. For dual-flush buttons, an annual check of the seal gaskets keeps both flush modes working efficiently.