High-efficiency Faucets
High-efficiency Faucets | Plumbing Fixture Replacements | Plumbing | Kodak
Swap out leaky, dated fixtures for HEP’s high-efficiency faucets and feel the difference every time you turn on the tap. Our EPA WaterSense-rated models cut consumption by up to 30 %, yet deliver a strong, splash-free flow that makes cooking, cleaning, and self-care more enjoyable. Elegant finishes, smooth single-handle control, and rugged ceramic valves give your kitchen or bath a modern look while trimming monthly utility costs—a win for your wallet and Kodak’s beautiful French Broad watershed alike.
From a single faucet swap to full-scale plumbing fixture replacements, our certified pros arrive on time with shoe covers, drop cloths, and everything needed to complete most jobs in one visit. We’ll dispose of the old units responsibly, set the new fixtures to factory-spec pressure, and walk you through proper maintenance so they stay like new. Ready to elevate your space? Call HEP today for a free, no-pressure quote and enjoy fresh, efficient water flow by the weekend.
FAQs
What makes a faucet “high-efficiency,” and how much water can it really save?
A faucet is considered high-efficiency when its maximum flow rate is 1.5 gallons per minute (GPM) or less while still meeting performance standards set by the EPA’s WaterSense® program. Conventional kitchen and bath faucets often flow at 2.2 GPM or higher, so switching to a WaterSense-labeled model can cut faucet water use by roughly 30 % without noticeable changes in convenience. For a typical Kodak household, that amounts to about 700–1,000 gallons of water saved per year, which also reduces the energy needed to heat that water.
Are high-efficiency faucets compatible with the existing plumbing in most Kodak homes?
Yes. Modern high-efficiency faucets are designed with the same ½-inch NPT (National Pipe Thread) or ⅜-inch compression connections found on standard fixtures. As long as your shut-off valves and supply lines are in good shape, the new fixture will thread directly onto the same fittings. In older Kodak properties where galvanized lines, outdated stop valves, or non-standard threads are present, our technicians can install adapters or upgrade the stops during the replacement to ensure a leak-free, code-compliant connection.
What is involved in replacing my old plumbing fixtures with high-efficiency models?
The process starts with a short inspection to confirm water-pressure levels, valve accessibility, and cabinet clearances. After shutting off the local angle stops, the plumber disconnects the supply lines, removes the existing faucet (and drain assembly if applicable), cleans the deck surface, and checks for any damage or corrosion. The new high-efficiency faucet, aerator, or showerhead is then set in place with fresh gaskets, mounting hardware, and high-grade plumber’s putty or silicone. Finally, we reconnect the supply lines, turn the water back on, flush debris, and test for leaks and proper flow. A single faucet swap generally takes about an hour, but multiple fixture upgrades can often be completed in one service visit.
Will installing a high-efficiency faucet reduce my water pressure or make the stream feel weak?
It shouldn’t. High-efficiency faucets use advanced aerators and laminar-flow devices to mix air with water or produce multiple micro-streams. You get the same rinsing power while using less water. Because the restriction is at the faucet outlet—not in the supply piping—your static water pressure inside the home remains unchanged. If you currently experience low pressure, it is usually due to mineral buildup, partially closed valves, or undersized piping, not the efficiency rating of the fixture.
Are there any rebates or incentives in Kodak or Sevier County for installing WaterSense-certified fixtures?
Yes. Sevier County Utility District (SCUD) periodically offers bill credits or instant rebates on WaterSense-labeled faucets, showerheads, and toilets—typically $10–$40 per fixture. The Tennessee Valley Authority’s EnergyRight® program also promotes water-heating energy savings, and some high-efficiency plumbing upgrades qualify. We stay current with local incentives and can provide the necessary paperwork or proof of installation when you schedule your replacement with us.
How long will my water be shut off during a faucet replacement, and do I need to prepare anything?
For a straightforward swap, the water is usually off for 15–30 minutes per faucet. If we’re upgrading shut-off valves or addressing corrosion, it can extend to about an hour. To help the process go smoothly, clear out items stored under the sink, know where your main shut-off is in case of valve failure, and set aside a small bucket of water for hand-washing while service is underway. Our technicians wear protective booties, use drop cloths, and clean the workspace before we leave, so minimal prep is needed on your part.