Reverse-osmosis Units
Reverse-osmosis Units | Water Purification | Plumbing | Jamestown
At HEP, we bring crystal-clear confidence to every tap in Jamestown with expertly installed reverse-osmosis units that strip away sediments, chemicals, and lingering tastes other systems miss. Our licensed plumbers handle everything from precise feed-line connections to sleek faucet mounting, so you can enjoy restaurant-quality drinking water without bulky pitchers or constant filter swaps. You’ll taste the difference from the first sip—and see it in spotless glassware, brighter coffee, and gentler baths for sensitive skin.
Because true water purification hinges on performance you can trust, we back each unit with routine maintenance plans, rapid local support, and a satisfaction guarantee that keeps your family hydrated and worry-free year after year. Ready to trade uncertainty for pristine peace of mind? One call to HEP turns Jamestown’s ordinary tap into an endless source of purity.
FAQs
How does a reverse-osmosis system work and what contaminants does it remove from Jamestown’s water supply?
Reverse osmosis (RO) forces pressurized tap water through a semi-permeable membrane that is rated at 0.0001 micron—small enough to block almost every dissolved solid. In Jamestown, this means the system can remove up to 98 % of total dissolved solids (TDS), including lead, arsenic, nitrates, fluoride, PFAS, chlorine by-products, and micro-organisms. A typical RO unit also has carbon pre- and post-filters that strip out chlorine, bad tastes, and odors, giving you clean, fresh-tasting water right at your sink.
What maintenance is required for my RO unit and how often should filters be replaced?
Routine maintenance is simple: replace sediment and carbon pre-filters every 6–12 months, swap the RO membrane every 2–3 years, and change the post-carbon polishing filter annually. If your household uses a lot of water or Jamestown experiences seasonal spikes in sediment, you may need to shorten those intervals. Sanitizing the storage tank and housing once a year keeps bacteria from colonizing the system. Our service plans track these dates for you and include water-quality testing to confirm the membrane is still performing at >90 % rejection.
Will installing a reverse-osmosis system affect my water pressure or flow rate?
While the RO process is slower than standard filtration, today’s residential units include a pressurized storage tank that delivers a steady 35–60 psi to the drinking-water faucet, so most homeowners notice little difference. Flow rate at the dedicated RO spigot is usually 0.5–0.7 gallons per minute—ample for filling pots or coffee makers. The main household plumbing pressure remains unchanged, and whole-house pressure loss is not an issue because the RO system treats only the water used for drinking and cooking.
Is an RO unit cost-effective compared with buying bottled water in Jamestown?
Absolutely. A family of four that buys just two cases of bottled water per week spends roughly $700–$800 per year. By comparison, an RO system averages $0.03–$0.05 per gallon in filter and membrane costs, totaling $100–$150 annually, including routine maintenance. Besides saving money, you’ll cut hundreds of single-use plastic bottles out of the local waste stream, supporting Jamestown’s sustainability goals.
Can an RO system be connected to my refrigerator ice maker or other appliances?
Yes. We can tee off the RO line to supply your fridge, icemaker, coffee machine, or even dedicated pet-water dispensers. Because RO water is virtually mineral-free, it prevents scale build-up in ice makers and espresso machines, extending their life. All we need is a nearby ¼-inch water line, and we include a restrictor valve to maintain proper pressure so appliances operate correctly.
How is the RO system installed in my Jamestown home and do I need a professional plumber?
Most units fit neatly under the kitchen sink: we mount the three-stage filter assembly, place the 3–4 gal storage tank, drill a 3⁄8-inch hole for the dedicated faucet, and connect to the cold-water line and drain with an air-gap adapter. Handy homeowners can follow the manufacturer’s instructions, but a licensed plumber ensures code-compliant drain connections, leak-free joints, and optimal membrane pressure. Our Jamestown team completes typical installations in 2–3 hours, tests for leaks, and documents baseline water quality for future comparisons.