Great-tasting Water
Great-tasting Water | Water Purification | Plumbing | Harrogate
Imagine turning on the tap and tasting freshness usually reserved for mountain springs; that’s what HEP brings to homes and businesses across Harrogate. Our qualified engineers blend advanced filtration, softening and smart plumbing know-how to strip out chlorine tang, limescale and hidden nasties, leaving only crisp, crystal-clear hydration. From compact under-sink units to whole-house solutions, every installation is tailored, tidy and backed by friendly local support—so you enjoy better brews, kinder skin and longer-lasting appliances without lifting a finger.
At the heart of it all is meticulous water purification that respects Yorkshire’s natural character while elevating it to gourmet quality. Whether you’re renovating a kitchen or future-proofing a spa, HEP makes the upgrade effortless: quick quotes, minimal disruption, and a noticeable wow with the very first sip.
FAQs
Why should I consider a water purification system for my Harrogate home when the mains water is already safe to drink?
Although Harrogate’s municipal supply meets UK drinking-water standards, it can still contain chlorine, trace metals, micro-sediments, and hardness minerals that affect taste, odour, and limescale build-up. A dedicated purification system—using carbon, sediment and reverse-osmosis or softening stages—removes these residues, giving you noticeably fresher-tasting water, protecting kitchen appliances, and reducing plastic bottle purchases.
What types of water purification or filtration do you install and how do they differ?
We offer three main solutions: (1) Under-sink carbon block filters that remove chlorine, herbicides/pesticides, and organic compounds—ideal when taste and odour are the primary concern; (2) Reverse-osmosis (RO) systems that force water through a semi-permeable membrane, removing up to 99% of dissolved solids, heavy metals, fluoride and micro-organisms—perfect for coffee aficionados or anyone wanting near-bottled quality; and (3) Whole-house water softeners combined with carbon pre-filters, which treat every tap, stop limescale, and extend appliance life. We tailor the set-up after testing your incoming supply.
Will a purification unit affect my water pressure or flow rate?
A correctly sized system has minimal impact. Under-sink carbon filters usually deliver 1.9–2.5 litres per minute—similar to a standard kitchen mixer. RO units store treated water in a pressurised tank, so everyday flow remains strong; only during high demand (e.g., continuous jug filling) might you notice a slight drop. Whole-house softeners are selected based on your incoming flow (LPM) so showers and combi-boilers work normally. We always perform a flow analysis before installation to guarantee adequate pressure.
How often do filters and membranes need replacing and what maintenance is involved?
Most carbon or sediment cartridges last 6–12 months depending on usage and water quality. RO membranes typically last 2–3 years if pre-filters are changed on schedule. Water softener resin beds regenerate automatically using food-grade salt; you’ll just top up salt every 4–6 weeks. During our annual service visit we test TDS (total dissolved solids), sanitise housings, inspect O-rings, check for leaks, and confirm that your water still meets the desired taste and purity levels.
What are the installation requirements and how long does it take?
An under-sink system needs roughly 30 cm × 20 cm of cupboard space, a cold-water feed, drainage connection, and a small hole for the dedicated drinking-water tap (we can often adapt an existing 3-in-1 tap). Typical install time: 2–3 hours. An RO unit takes 3–4 hours because we fit the storage tank and run additional tubing. Whole-house softeners require garage, utility-room or loft space near the rising main and an electrical socket; installation usually completes within one working day. All work is carried out by our WRAS-approved plumbers with minimal disruption.
How much does a complete water purification set-up cost in Harrogate and is it covered by warranty?
Prices start at £165 inc VAT for a single-stage carbon filter, £485–£695 for a premium reverse-osmosis package including tap and first-year service, and from £1,050 for a metered, high-capacity whole-house softener with carbon pre-filtration. We provide free on-site water testing and a no-obligation quote. All systems come with a 2-year parts and labour warranty (extendable to 5 years with our service plan) plus ongoing customer support from our Harrogate team.