High-recovery Model
High-recovery Model | Tank Water Heater | Plumbing | Guild
Looking for endless hot showers without the long wait? HEP’s high-recovery model tank water heater is engineered to replenish hot water faster than standard units, so your family never has to stagger bath times or cringe at a lukewarm rinse. Oversized burners, superior insulation, and smart temperature controls translate into rapid recovery, consistent performance, and lower energy costs—perfect for busy households in Guild that value comfort and efficiency.
Our licensed plumbers handle everything from precise sizing and tidy installation to haul-away of your old unit, backing each job with transparent pricing and rock-solid warranties. Whether you’re upgrading an aging system or outfitting a new build, a high-recovery tank water heater from HEP delivers the reliable, piping-hot results you expect—day after day, shower after shower.
FAQs
What does “high-recovery” mean in a tank-type water heater?
A high-recovery water heater is engineered to replace hot water more quickly after it is drawn from the tank. While a standard 40- or 50-gallon residential heater typically recovers 35–40 gallons of hot water per hour, Guild’s high-recovery models can deliver 75–120 gallons per hour, depending on fuel type and input rating. The faster recovery rate is achieved with larger or dual burners, optimized heat-exchange surfaces, and in some models, advanced flue-baffle designs that extract more heat from the combustion gases.
How does a high-recovery model benefit my household or business compared with a conventional heater?
1. More hot water on demand – ideal for large families, restaurants, salons, and other high-usage applications. 2. Smaller footprint – a 50- or 65-gallon high-recovery unit can often replace an 80- or 100-gallon standard heater, freeing up floor space. 3. Lower standby loss – because you can downsize the tank capacity, you reduce the amount of stored water that must be kept hot 24/7. 4. Energy savings – quicker heat transfer and, on select Guild models, condensing technology push thermal efficiencies into the 90–96 % range, trimming utility bills. 5. Faster payback – many customers see operating-cost savings that offset the higher purchase price in 2–4 years.
What sizes and fuel options does Guild offer in its high-recovery line?
Guild stocks high-recovery units in 40-, 50-, 65-, 75-, and 100-gallon nominal capacities. Natural gas is the most common fuel, with input ratings from 60,000 to 199,000 Btu/h. We also carry select LP (propane) versions and 12- to 18-kW electric models for locations without gas service. For commercial applications, condensing gas units up to 299,000 Btu/h and 119 gallons are available. All models are UL- or CSA-listed and meet the latest DOE energy standards.
Can a high-recovery water heater be retrofitted into my existing plumbing system?
In the majority of cases, yes. High-recovery heaters use the same ¾- or 1-inch water connections and standard vent sizes (3- or 4-inch) found on conventional units. When upgrading, our technicians verify: • Gas line sizing – higher input models may need a larger or dedicated gas line. • Venting – power-vent and condensing models often require PVC or polypropylene vent pipe to handle lower flue-gas temperatures. • Electrical supply – electric ignition or powered anodes need a nearby 120-V receptacle. Most installations are completed in one day with minimal disruption.
What routine maintenance is recommended to keep a high-recovery water heater operating efficiently?
1. Flush the tank every 6–12 months to remove sediment that can coat the heat exchanger and slow recovery. 2. Inspect and replace the anode rod about every three years (sooner in aggressive water conditions) to prevent tank corrosion. 3. Clean or replace inlet screen filters on power-vent units to maintain proper airflow. 4. For condensing models, check and neutralize condensate lines annually. Guild offers affordable maintenance plans that include all of the above plus a full combustion analysis and safety inspection.
Are rebates or incentives available for installing a high-recovery unit, and how do I qualify?
Yes. Many utilities and state energy offices provide cash incentives—typically $50–$300 for ENERGY STAR® certified residential models and up to $1,000 for high-efficiency commercial units. To qualify: 1. Choose a Guild model that meets the program’s minimum Uniform Energy Factor (UEF) or thermal efficiency. 2. Have the unit installed by a licensed plumber (Guild can provide referrals or handle turnkey installation). 3. Submit the rebate form, proof of purchase, and installer’s invoice within the specified timeframe (usually 60–90 days). Guild’s customer support team can verify eligibility and even prepare the paperwork to ensure you receive every available credit.