Water-saving Upgrades
Water-saving Upgrades | Plumbing Fixture Replacements | Plumbing | Georgetown
Looking to shrink your water bill without sacrificing comfort? HEP’s water-saving upgrades in Georgetown make it simple. Our licensed pros swap out leaky faucets, outdated showerheads, and inefficient toilets for modern, ultra-efficient models that curb consumption by up to 40 %. You get crystal-clear performance, less strain on local resources, and the peace of mind that comes with EPA-certified fixtures—all installed with the neighborly service Georgetown homeowners have trusted for years.
From single-family homes in Old Town to bustling storefronts on the Square, our plumbing fixture replacements are tailored to your space, style, and budget. We handle everything from permit pull to post-install cleanup, and we even haul away the old fixtures for recycling. Schedule today and start saving water, energy, and money with every turn of the tap.
FAQs
What qualifies as a water-saving plumbing fixture and which items can you replace?
Water-saving fixtures are products that meet or exceed EPA WaterSense or similar efficiency standards—typically 1.28 gpf or less for toilets, 1.5 gpm or less for bathroom faucets, 2.0 gpm or less for kitchen faucets, and 2.0 gpm or less for showerheads. On our Georgetown service calls we commonly swap out standard toilets, bathroom and kitchen faucets, showerheads, and sometimes urinals or utility sinks in commercial spaces. We also replace older supply lines, shut-off valves, and aerators to make sure every component supports maximum water efficiency.
How much water and money can I save by upgrading my fixtures?
A family of four that switches from 3.5 gpf toilets to 1.28 gpf WaterSense models can conserve roughly 16,000 gallons per year—about a 60 % reduction in toilet water use. Replacing 2.5 gpm showerheads with 2.0 gpm versions saves close to 2,700 gallons annually, and efficient faucets can cut another 700–1,000 gallons. At Georgetown’s current residential water rate tiers, those savings translate to $80–$140 per year in lower utility bills, often paying back the fixture cost within two to three years.
Are there rebates or incentives in Georgetown for installing high-efficiency toilets, faucets, or showerheads?
Yes. The City of Georgetown’s Water Conservation Program periodically offers bill credits of up to $100 for each WaterSense-labeled toilet (limit 2 per account) and $10–$15 for approved faucet aerators or showerheads. Funds are limited and you must apply within 90 days of purchase, include a copy of the receipt, and allow an inspection. We provide all necessary model numbers and fill out the paperwork for you at the end of the installation to make sure you capture every available rebate.
Will low-flow fixtures reduce my water pressure or shower experience?
Today’s high-efficiency products use advanced aerators and pressure-compensating valves that maintain a strong, comfortable stream while using less water. The fixtures we install are field-tested in Georgetown homes, so you’ll notice the same—or in many cases better—performance compared with older devices clogged by mineral buildup. If you have an existing pressure issue, we can diagnose it during the visit and make adjustments to ensure consistent flow.
Do I need a permit for plumbing fixture replacements in Georgetown?
Simple ‘like-for-like’ swaps of faucets or showerheads usually do not require a permit, but replacing a toilet, adding shut-off valves, or moving water lines can trigger the need for a plumbing permit under the Georgetown Building Inspections Department. As licensed plumbers, we determine whether a permit is necessary, pull it on your behalf, and arrange any required inspections so your upgrade stays fully code-compliant.
How long does the replacement take and what is included in your service?
Most single-fixture replacements take 45–90 minutes; full home retrofits (two toilets, two faucets, and two showerheads) average 3–4 hours. Our flat-rate service includes removal and eco-friendly disposal of the old fixture, supply of all new gaskets, wax rings, hoses, and shut-off valves, installation to manufacturer specs, leak testing, cleanup, and haul-away. We also show you how to operate any new features and leave you with warranty documents and rebate forms before we go.