Low-flow Toilet
Low-flow Toilet | Plumbing Fixture Replacements | Plumbing | Englewood
Looking for a smarter way to save water and money in Englewood? HEP’s licensed plumbers specialize in swapping out outdated commodes for sleek, ultra-efficient low-flow models that curb utility bills without sacrificing flushing power. From the moment we arrive, you’ll notice the HEP difference: punctual technicians, tidy work areas, and transparent pricing that turns a simple toilet upgrade into a seamless home-improvement win.
Whether you need a single bathroom reboot or a whole-house overhaul, our team handles every step of your plumbing fixture replacements with precision—removing old units, inspecting supply lines, and installing high-performance fixtures built to last. Enjoy quieter operation, lower water usage, and the peace of mind that comes from having Englewood’s trusted pros on the job. Schedule today and flush your water worries for good!
FAQs
What qualifies as a low-flow toilet, and how does it differ from older models?
A toilet is considered “low-flow” when it uses no more than 1.28 gallons per flush (GPF) under current EPA WaterSense guidelines. Traditional toilets installed before the mid-1990s often use 3.5–7.0 GPF. Low-flow fixtures achieve the same or better waste removal by combining improved bowl design, larger trapways, and high-efficiency flush valves. Dual-flush models let you choose between an even lower liquid-waste flush (around 0.8 GPF) and a full 1.28 GPF flush for solids, giving you added control over water savings.
How much water and money can I expect to save by switching to a low-flow toilet in Englewood?
The average Englewood household completes about 5 flushes per person per day. Replacing one older 3.5 GPF toilet with a 1.28 GPF model saves roughly 2.22 gallons per flush, or about 4,055 gallons per year. At Denver Water’s 2024 residential rate of approximately $5.77 per 1,000 gallons, that amounts to $23–$25 in annual water-bill savings per toilet, not counting sewer charges that are also volume-based. Over a 10-year lifespan, a family of four could recoup $900+ in combined water and sewer fees for each upgraded fixture.
Will a low-flow toilet work properly with my existing plumbing and sewer lines?
In almost all cases, yes. Modern low-flow toilets are engineered to move waste through standard 3- or 4-inch drain lines effectively. Our technicians check critical factors such as venting, slope, and distance to the sewer stack before installation. If your home has very long horizontal runs or cast-iron lines with heavy scale, we may recommend a pressure-assist model for extra force or clean/rehabilitate the line first to prevent slow drains and recurring clogs.
Are there rebates or incentives available in Englewood or Colorado for installing low-flow toilets?
Yes. Denver Water’s “Use Only What You Need” program offers a $100 rebate per WaterSense-labeled toilet that replaces a pre-1996 unit (limit three per account). The City of Englewood matches an additional $50 per fixture for single-family residences while funds last. To qualify, you must submit a pre-approval application, purchase an approved model, and schedule a post-installation inspection or photo verification. We handle the paperwork for our customers at no extra charge.
What is involved in replacing an old toilet with a new low-flow model, and how long does the job take?
A standard replacement service includes shutting off the water supply, draining and removing the existing toilet, scraping away the old wax ring, inspecting the flange, installing new closet bolts, setting your chosen low-flow fixture with a wax or wax-free seal, reconnecting the supply line, and performing multiple test flushes. Barring flange repairs, the procedure takes 60–90 minutes per unit. We haul away the old toilet, ensure proper disposal, and leave your bathroom clean and ready for use.
How do I maintain and troubleshoot a low-flow toilet to keep it flushing efficiently?
1. Use only septic-safe, rapid-dissolving toilet paper to avoid excessive bulk. 2. Avoid chemical “drop-in” tank tablets; they can degrade seals and valves. Use mild dish soap and a soft brush for routine cleaning. 3. If the flush weakens, check the fill valve height and ensure the water level reaches the manufacturer’s mark. A quick adjustment or $10 replacement part usually restores performance. 4. Should a clog occur, start with a high-quality plunger; low-flow bowls are designed for a tight seal. For persistent blockages, a closet auger is safer than harsh drain chemicals. 5. Schedule a professional inspection every 3–5 years. We’ll look for silent leaks, worn flappers, or mineral buildup that can increase water use or reduce flush power.