High-efficiency Models
High-efficiency Models | Toilet Upgrades and Replacements | Plumbing | Elora
Swap wasted water for smart savings with HEP’s premium line of high-efficiency toilets, tailored for the heritage homes and new builds that make Elora unique. Our licensed plumbers handle every detail—from disposing of your old fixture to precision-installing a WaterSense®-certified model that slashes consumption by up to 60 %, all while boosting flush power and quiet performance. Imagine fewer clogs, lower utility bills, and a refreshed bathroom aesthetic delivered in one neat visit.
Whether you’re renovating a single ensuite or upgrading an entire commercial property, our crew makes toilet upgrades and replacements effortless. We stock leading brands, back every install with a workmanship guarantee, and even process available municipal rebates on your behalf. Book today and feel the difference every time you flush.
FAQs
What makes a toilet “high-efficiency,” and how much water will it actually save me?
A high-efficiency toilet (HET) is certified to use 4.8 L (1.28 gal) or less per flush, compared with the 13 L (3.5 gal) required by many pre-1990 models. Dual-flush HETs average even less—about 3.5 L per flush over time—because they offer a reduced-volume flush for liquid waste. In a typical four-person Elora household this translates to 60–80 m³ of water saved every year, or roughly 20–25 % of the home’s total indoor consumption.
Will a high-efficiency toilet work properly with the older plumbing in my Elora home?
Yes. Today’s HETs are engineered to meet modern code requirements while maintaining full compatibility with 3-inch and 4-inch waste stacks found in most pre-1980 houses around Centre Wellington. During our site visit we check venting, flange height and drain pitch to confirm proper siphon action. If we discover cast-iron piping, a low-slope run or calcium build-up, we’ll recommend simple corrections—such as installing a new PVC closet bend or power-snaking the line—so that the new toilet performs exactly as intended.
Are there rebates or incentives available in Elora for upgrading to a high-efficiency toilet?
While the old provincial rebate program has ended, a number of local options are still open: • Township of Centre Wellington occasionally offers a $50–$75 Water Conservation Rebate for WaterSense-labelled toilets—available until annual funds are exhausted. • Enbridge Gas customers may fold toilet upgrades into broader Home Efficiency Rebate Plus (HER+) projects when combined with other water-saving fixtures. • Canada Greener Homes Loan can finance the purchase at 0 % interest if bundled with an energy audit. We handle the paperwork and provide model numbers, proof of performance and disposal certificates so you can claim any incentive for which you qualify.
How long does a toilet replacement take and will I lose use of my bathroom?
A straightforward swap in Elora usually takes 1.5–2 hours, including removal, disposal, new wax (or rubber) seal, water-supply upgrade and caulking. If the flange is corroded or the floor requires leveling, add another hour. Your bathroom will be out of service only during that window; once the final leak test is done you can use the toilet immediately. We book appointments at your convenience—often same-week—and always bring protective floor coverings to keep the space clean.
What does a high-efficiency toilet cost and how quickly will it pay for itself?
Installed prices in Elora range from $495 for a basic WaterSense gravity-flush model to $1,100 for a skirted, dual-flush or pressure-assist unit with soft-close seat. At current Centre Wellington metered rates (about $3.02/m³ for water and wastewater), an HET saves $180–$250 over 10 years compared with a 6 L toilet, and $550–$700 compared with a 13 L pre-1990 unit. Add any rebate, and most homeowners reach simple payback in 3–5 years while benefiting from quieter operation and a modern look immediately.
Do high-efficiency toilets require special maintenance or cleaning?
Maintenance is virtually identical to that of a standard toilet: a mild, non-abrasive bowl cleaner once a week and an annual inspection of the fill valve and flapper (or tower seal). Because HETs rely on precise water volumes, we recommend avoiding in-tank cleaning tablets, which can degrade seals faster than normal. Pressurized-assist models have a sealed inner tank that should be flushed with clean water every five years—a ten-minute job we can perform during any service visit. Replacement parts are stocked by local Elora plumbing suppliers, so future repairs are quick and inexpensive.