Low-flow Toilets
Low-flow Toilets | Plumbing Fixture Replacements | Plumbing | Chattanooga
Tired of watching your hard-earned dollars swirl away with every flush? HEP’s low-flow toilets let you keep comfort high while cutting household water use by up to 30 %. Our Chattanooga technicians remove bulky, outdated commodes and install sleek, WaterSense-certified models in a single visit—no mess, no stress. You’ll notice the difference on your next utility bill, and the Tennessee River will thank you, too.
From selecting the right bowl height to hauling away the old unit, we handle every step of your plumbing fixture replacements with hometown courtesy and a rock-solid workmanship guarantee. Schedule today and see why families and businesses across Chattanooga trust HEP to keep their bathrooms running smoothly, efficiently, and sustainably.
FAQs
What is considered a low-flow toilet, and how much water can it save in Chattanooga?
A low-flow—or high-efficiency—toilet (HET) uses 1.28 gallons per flush (gpf) or less, compared with the 3.5–7 gpf used by pre-1994 fixtures and the 1.6 gpf required by federal law today. For the average Chattanooga household, converting one old toilet to a 1.28 gpf model saves roughly 16–20 gallons per day, or 5,800–7,300 gallons per year. With Tennessee’s current residential water rate structure, that translates to an annual utility-bill reduction of about 10-15 %, depending on family size and usage patterns.
Will a low-flow toilet provide enough flushing power, or will I experience more clogs?
Modern HETs rely on redesigned bowls, larger trapways, and pressure-assisted or optimized gravity systems to remove waste efficiently with less water. Independent MaP (Maximum Performance) testing rates toilets up to 1,000 g of waste per flush; most models we install score 600 g or higher—far above normal household needs. When professionally installed with correct venting and slope, low-flow units clog no more often than standard toilets in Chattanooga homes.
Are low-flow toilets compatible with older plumbing in Chattanooga’s historic homes?
Yes. Most pre-1970 drain stacks are 3- or 4-inch cast iron or PVC, which work well with today’s HET designs. During replacement we inspect the flange height, wax ring seal, and venting to ensure proper flow. If we find undersized venting or corroded iron, we can make spot repairs so the new fixture meets Tennessee Plumbing Code without requiring a full drain replacement.
How long does a low-flow toilet replacement take and will my water be shut off?
A straight swap—removing the old toilet, inspecting the flange, installing the new HET, and testing—takes 60–90 minutes. We shut off the water only to the fixture, not to your whole house, for about 10 minutes. If flange repairs or subfloor reinforcement are needed, the job can extend to 2–3 hours, but water service is restored to the rest of the home right away.
Are there rebates or incentives for installing low-flow toilets in Chattanooga?
The Tennessee Valley Authority (TVA) periodically offers WaterSense rebates through local utilities, and the City of Chattanooga’s Water Quality Program has provided $25–$50 bill credits for WaterSense-labeled toilets in past cycles. Although funding varies year to year, we track current incentives and supply the paperwork—proof of purchase, model number, and installation affidavit—so you can claim any available credits.
Can you replace other bathroom fixtures with water-saving models at the same time, and what does it cost?
Absolutely. We can install WaterSense showerheads (≤2.0 gpm), high-efficiency faucets (≤1.5 gpm), and even dual-flush conversion kits during the same visit. Bundling work saves on labor and trip fees. As a guideline, low-flow toilet installations start around $425 including fixture and parts; adding a showerhead swap is typically $75, and faucet replacements range from $150–$250. We provide firm, itemized estimates after an on-site evaluation.