Energy Bills
Energy Bills | Tankless Water Heater Install | Plumbing | Belvidere
Enjoy endless hot water and lower utility costs with HEP’s expert tankless water heater install services right here in Belvidere. Our licensed plumbers remove bulky, outdated tanks and replace them with space-saving, on-demand technology that heats water only when you need it. You’ll experience faster hot-water delivery, up to 40% energy savings, and the peace of mind that comes from a system built to last twice as long as a traditional heater—perfect for Belvidere’s chilly mornings and busy households.
From the free, no-pressure estimate to the final safety check, we handle every detail with the honesty and craftsmanship Central Illinois families have trusted for decades. We’ll size the unit to your home, pull all permits, and back the job with rock-solid warranties and 24/7 emergency support. Ready to reclaim your utility budget and free up closet space? Call HEP today and schedule your upgrade; the next shower you take could be the best one yet.
FAQs
How will switching to a tankless water heater lower my energy bills in Belvidere?
Traditional storage-tank heaters keep 40–50 gallons of water hot 24/7, which means they burn gas or draw electricity even when you are asleep or at work. A tankless unit heats water only when a fixture is opened, cutting standby losses completely. In our climate, the U.S. DOE estimates savings of 24-34 % for gas models and up to 50 % for electric models. Many Belvidere homeowners see their water-heating line drop by $100–$250 per year, so a quality unit often pays for itself within 5–7 years.
What size tankless unit do I need for my Belvidere home?
Sizing is based on two factors: 1) total gallons per minute (GPM) you want to run at once, and 2) the temperature rise needed from our average incoming water of 48–52 °F to your preferred 120 °F. For a family of four running two showers and a dishwasher at the same time, you would need 7–8 GPM at a 70 °F rise—typically a 180,000 BTU gas unit. Smaller households or point-of-use installs (kitchen, guest bath) may only need 4–6 GPM. During our free on-site estimate we measure flow rates, count fixtures, and match you with a model that never runs out of hot water but won’t be oversized and wasteful.
Will a tankless water heater work with the existing plumbing in older Belvidere houses?
Yes. In most cases we reuse your current hot- and cold-water lines and simply adapt the connections. The unit mounts on the wall, freeing up floor space. Older homes may need: • a larger gas supply line (¾″ instead of ½″) for high-BTU models, • a new Category III/IV vent or concentric PVC vent through the sidewall or roof, and • an electrical outlet for ignition and controls. Our licensed plumbers handle all code upgrades, pressure tests, and permits with the City of Belvidere so the installation passes inspection the first time.
How long does professional installation take?
A straightforward replacement of a gas storage tank with a same-fuel tankless model takes about 5–7 hours. Projects that involve rerouting gas lines, adding a condensate drain, or converting from electric to gas may extend to a full day. You’ll have hot water before we leave; we also haul away the old tank, register your warranty, and show you how to use the digital controller.
What maintenance does a tankless water heater need in Belvidere’s hard-water area?
Boone County water averages 18–22 grains per gallon, which causes scale inside heat exchangers. We recommend: • Installing a whole-home scale inhibitor or softener. • Flushing the unit with white vinegar or food-grade descaler once a year (every 6 months if no softener). The flush takes about 45 minutes and keeps efficiency above 95 %. • Cleaning the air intake filter quarterly. We offer an affordable annual service plan that covers all of the above and keeps your warranty valid.
Are there rebates or incentives for tankless installations in Belvidere?
Yes. Through 12/31/2032 the federal Energy Efficient Home Improvement Credit (Section 25C) refunds 30 % of the installed cost—up to $600 for an ENERGY STAR-certified gas tankless unit. Nicor Gas currently offers a $300 rebate for models ≥0.95 UEF, and ComEd gives $50 for qualifying electric units. We complete and submit all paperwork for you and deduct the utility rebate up front, so you receive the savings immediately.