Dissolved Minerals
Dissolved Minerals | Water Purification | Plumbing | Allardt
Imagine turning on the tap and knowing that every drop is crisp, clean, and free of the hard-water buildup that plagues so many Allardt homes. HEP’s dissolved minerals plumbing team targets the calcium, magnesium, and trace metals that stain fixtures and clog appliances, installing tailor-made systems that fit seamlessly into your existing setup. From the first inspection to the final flush, our licensed technicians treat your pipes—and your schedule—with the respect neighbors deserve.
With precise water purification technology, we strip away impurities without stripping away pressure, delivering refreshing taste and longer-lasting plumbing in one smart upgrade. Fewer stains, fewer service calls, and fewer plastic bottles mean more savings and more confidence every time you turn on the faucet. Discover why families across Allardt trust HEP to keep their water—and their lives—flowing perfectly.
FAQs
What dissolved minerals are commonly found in Allardt’s water supply, and why should I be concerned about them?
Most well and municipal sources in the Allardt area flow through limestone‐rich bedrock, so the water typically contains elevated levels of calcium, magnesium, iron, and manganese. These minerals are not normally harmful to drink, but they do create “hard water.” Hard water forms scale inside pipes and water heaters, stains fixtures and laundry, and leaves spots on dishes. Excess iron can also cause reddish-brown staining and a metallic taste. Removing or reducing these minerals protects plumbing, improves water quality, and extends appliance life.
How do dissolved minerals damage my plumbing and household appliances?
Calcium and magnesium precipitate out of hard water when it’s heated or pressurized, producing a rock-like scale that coats pipe interiors, heating elements, and valve seats. Scale builds up fastest in water heaters, reducing energy efficiency and shortening the unit’s life. It can also clog faucet aerators, showerheads, ice makers, and coffee makers. Iron and manganese can accumulate in well pumps and pressure tanks, causing blockages and increased wear. Over time you may experience reduced water pressure, higher utility bills, and premature failure of water-using appliances.
What water-purification solutions do you install to reduce dissolved minerals in Allardt homes?
We offer three main treatment options: 1. High-efficiency ion-exchange water softeners for whole-house removal of calcium and magnesium. 2. Combination softener/iron filters that use specialty media to target iron, manganese, and hardness at the same time—ideal for many local wells. 3. Reverse osmosis (RO) drinking-water systems that strip nearly all dissolved solids, including salts and metals, from a dedicated kitchen tap. Each system is sized to your water chemistry and household usage, and we handle testing, installation, and ongoing service.
What is the difference between a standard water softener and a reverse osmosis (RO) unit when it comes to dissolved minerals?
A water softener exchanges hardness ions (calcium and magnesium) for sodium or potassium through a resin bed, preventing scale throughout the entire plumbing system. It is designed for whole-house use and keeps appliances protected. Reverse osmosis forces water through a semipermeable membrane that removes up to 95-99 % of all dissolved solids—including hardness minerals, sodium, fluoride, and many contaminants. Because RO is slower and produces wastewater during filtration, it is typically installed at a single point of use for cooking and drinking water. Many customers pair a softener for scale control with a small RO unit for premium tasting water.
How often does my dissolved-mineral treatment system need maintenance?
Maintenance varies by system type and water quality, but typical guidelines are: • Water softener: Check salt level monthly and keep the brine tank at least half full with high-purity salt. Have our technician test hardness, resin capacity, and valve operation once a year. • Iron/manganese filter: Inspect media bed annually and replace or rejuvenate it every 5–7 years depending on iron concentration. • Reverse osmosis: Replace sediment and carbon pre-filters every 6–12 months, sanitize the storage tank yearly, and change the RO membrane every 2–4 years or when TDS rejection falls below 80 %. Following these schedules ensures consistent mineral removal and system longevity.
Will removing dissolved minerals change the taste of my water or deprive me of essential nutrients?
Most people find softened water has a noticeably smoother feel and no mineral aftertaste, while RO-treated water tastes crisp and clean. The sodium added by a softener is minimal—about 18 mg per quart at 10 grains per gallon of hardness—well below dietary guidelines. If you prefer, we can set up the plumbing so only hot water is softened or supply potassium chloride in place of sodium. As for nutrients, minerals in water make up less than 1 % of daily requirements, so their removal has no meaningful impact on health when you maintain a balanced diet.