Reverse-osmosis Units
Reverse-osmosis Units | Water Purification | Plumbing | Kodak
Imagine turning on the tap in your Kodak home and tasting nothing but pure, refreshing clarity. HEP’s reverse-osmosis units strip away chlorine, sediment, heavy metals, and other unwelcome guests, leaving you with crisp water that elevates every sip, meal, and pot of coffee. Because these systems are professionally plumbed into your existing lines, you enjoy seamless performance and minimal maintenance, all backed by technicians who know the local water profile inside and out.
From first consultation to final quality test, HEP pairs cutting-edge technology with neighborly service. We size each unit to your household’s needs, install it with precision, and explain exactly how to keep it running at peak efficiency. If you’re ready for true water purification and a noticeable upgrade in taste, health, and appliance longevity, give our Kodak team a call and experience the HEP difference today.
FAQs
What contaminants does a reverse-osmosis (RO) system remove from Kodak’s municipal or well water?
Our RO units use a semipermeable membrane that rejects particles as small as 0.0001 micron. This means they remove up to 98-99% of dissolved salts, lead, PFAS, nitrates, fluoride, arsenic, chlorine by-products (THMs), micro-plastics, and most bacteria and viruses. A sediment pre-filter and carbon block stage catch rust, silt, chlorine, and organic taste-and-odor compounds, ensuring the membrane receives only pre-conditioned water and lasts longer.
How much water does an RO purifier waste, and can it be reduced?
Standard under-sink systems send 3–4 gallons of reject water to the drain for every gallon of purified water produced. We offer water-saving models with permeate pumps that cut the ratio to 1:1 or better. The brine can also be routed to a utility sink, garden, or washing machine (where local codes allow) to reclaim some of that water, further improving efficiency.
What routine maintenance is required for my RO system in Kodak?
1) Replace sediment and carbon pre-filters every 6–12 months to protect the membrane from clogging and chlorine attack. 2) Sanitize and flush the storage tank annually. 3) Replace the RO membrane every 2–4 years (TDS meter readings above 15–20% of feed water indicate it’s time). 4) Replace the post-carbon polishing filter yearly for crisp taste. Our service plans include scheduled filter swaps, membrane integrity checks, and leak inspections so you don’t have to track dates.
Will an RO unit lower the water pressure at my kitchen faucet?
The RO faucet is independent of your regular tap, drawing from a pressurized 2–4 gallon storage tank that delivers 30–40 psi—similar to a refrigerator dispenser. It does not affect the cold or hot lines of your main faucet. If you choose a tankless high-flow RO, an integrated booster pump maintains a steady 60–80 psi at the purified-water tap even during peak household demand.
Is remineralization necessary after reverse-osmosis purification?
RO water is exceptionally pure and therefore slightly acidic (pH 6–6.5) because the buffering minerals have been removed. While it’s perfectly safe to drink, many customers prefer the taste and alkaline balance of mineralized water. Our optional calcite or magnesium filter adds healthy calcium/magnesium ions, lifts pH to about 7.5, and improves flavor without raising TDS above 50 ppm.
How difficult is it to install an RO unit in a Kodak home with existing plumbing?
Most under-sink kits include a feed-water adapter that threads onto the cold-water shut-off valve, a drain saddle for the reject line, and a dedicated drinking-water faucet. A typical installation takes 2–3 hours with common hand tools. For slab foundations, we offer remote-location kits that let you place the RO system in a basement or utility room and run a ¼-inch line up to the kitchen. Our licensed plumbers handle permitting and code compliance (including air-gap requirements for Tennessee), ensuring a leak-free, professional setup.