- HEP Plumbing
- Low-flow Model

Low-flow Model
Low-flow Model | Toilet Upgrades and Replacements | Plumbing | Copperhill
Swap out that water-guzzling relic and step into the future of efficiency with HEP’s low-flow models—designed specifically for Copperhill homes that crave comfort without the waste. Our licensed plumbers remove your old fixture, install a sleek, high-performance replacement, and fine-tune every connection so you immediately enjoy quieter flushes, fewer clogs, and up to 60 % savings on your monthly water bill.
From single-family residences to quaint mountain rentals, our team makes toilet upgrades and replacements effortless. We handle permits, haul away debris, and back each job with a satisfaction guarantee, letting you relax while your bathroom becomes both eco-friendly and guest-ready. Ready to conserve water and cash? Book your appointment with HEP today and see how a smarter toilet can make a world of difference in Copperhill.
FAQs
What are the main benefits of upgrading to a low-flow toilet in Copperhill?
Low-flow toilets use advanced bowl and flush-valve designs to deliver the same or better performance while using roughly 1.28 gallons per flush (GPF) instead of the older 3.5–6 GPF models. This upgrade can cut indoor water use by up to 30 %, lower monthly utility bills, reduce strain on Copperhill’s municipal water system, and increase the value of your home by meeting modern efficiency standards.
How much water can I expect to save with a low-flow toilet?
A family of four using an older 3.5 GPF toilet will flush about 5,000 times per year, using roughly 17,500 gallons of water. Replacing that toilet with a 1.28 GPF WaterSense-certified model drops annual use to about 6,400 gallons—a savings of 11,100 gallons. In Copperhill, where average water rates are about $5 per 1,000 gallons, that’s roughly $55 saved each year per toilet.
Will a low-flow toilet perform as well as my current standard model?
Yes. Modern low-flow options rely on pressure-assisted or optimized gravity-flush technology to move waste efficiently with less water. Independent MaP (Maximum Performance) testing rates many WaterSense models at 800–1,000 grams per flush—well above the 350-gram industry baseline—so you can expect fewer clogs, quieter operation, and cleaner bowls compared with first-generation low-flow units from the 1990s.
Are rebates or incentives available in Copperhill for installing low-flow toilets?
Copperhill residents served by Tennessee American Water or the Ocoee Utility District can apply for a one-time $50–$100 rebate per WaterSense-labeled toilet, up to two per household. To qualify you’ll need your purchase receipt, proof of residency, and the old fixture’s manufacture date (1994 or earlier). Our plumbing team can supply the paperwork and haul away the old unit for proper recycling at no extra charge.
What is involved in replacing my existing toilet with a low-flow model?
The process typically takes 1–2 hours: 1. We shut off the water, drain and unbolt the old toilet, and inspect the closet flange. 2. A new wax or rubber seal is installed to prevent leaks. 3. The low-flow bowl and tank are set, leveled, and secured. 4. Supply lines are reconnected with a stainless braided hose and a quarter-turn shut-off valve if needed. 5. We test for leaks, adjust the fill valve, and haul away the old fixture. No flooring or wall alterations are normally required unless existing plumbing is damaged.
How do I choose the right low-flow toilet for my home?
Start with WaterSense certification to ensure 1.28 GPF or less. Next, consider: • Flush type: gravity vs. pressure-assisted—pressure units are louder but great for high-traffic bathrooms. • Bowl shape: elongated bowls offer more comfort; round-front bowls save space. • Rough-in size: most homes use a 12-inch rough-in; measure from the wall to the floor bolts. • Height: “comfort height” (17–19 in.) is easier on knees and backs. • MaP score: look for 600 grams or higher for clog-free performance. Our Copperhill technicians can bring sample models, explain features, and provide a cost-benefit comparison before you decide.