Reverse-osmosis Drinking Stations
Reverse-osmosis Drinking Stations | Water Purification | Plumbing | Benton
Benton families, businesses, and schools turn to HEP when they want the crystal-clear taste of reverse-osmosis water without the bottled-water price tag. Our licensed plumbers integrate compact RO stations right into your existing lines, forcing tap water through ultra-fine membranes that strip away lead, chlorine, PFAS, and even microscopic sediments. The result is a steady stream of refreshment that’s cleaner, safer, and kinder to the planet.
We begin with a free site assessment and flow-rate analysis, then schedule installation at a time that keeps your routine intact—most systems are sipping-ready in a single afternoon. From stainless-steel fittings to factory-calibrated filters, every component is chosen for efficiency and longevity, and ongoing maintenance is just a phone call away. For reverse-osmosis expertise you can taste, count on HEP for unmatched water purification in Benton and the surrounding communities.
FAQs
What is reverse osmosis and how does it purify drinking water?
Reverse osmosis (RO) is a filtration process that forces water through a semi-permeable membrane with microscopic pores (around 0.0001 micron). Dissolved salts, heavy metals, microorganisms, and organic compounds are too large to pass through, so only purified water reaches the storage tank and faucet. A typical RO drinking station also includes a sediment pre-filter, activated-carbon stages that remove chlorine and odors, the RO membrane, and a post-filter for final polishing, delivering crisp, clean water right at your sink.
Why is a reverse-osmosis drinking station a good choice for homes and businesses in Benton?
Benton’s municipal supply meets safety standards, but many residents still notice hardness, chlorine taste, or elevated total dissolved solids (TDS). An RO system lowers TDS by 90–99%, removes common contaminants such as lead and PFAS, and eliminates the need for single-use plastic bottles. For well-water users, RO provides an added safeguard against nitrates and agricultural runoff. The compact under-sink design saves space, and our licensed plumbers ensure the installation meets Arkansas plumbing codes and Benton building requirements.
How is a reverse-osmosis system installed and how long does the process take?
Installation involves attaching a feed line to your cold-water supply, mounting the filtration modules inside the sink cabinet, running a small drain saddle to your waste line, and drilling (or re-purposing) a countertop hole for the dedicated RO faucet. In most Benton homes the work takes 2–3 hours. Our technicians test your water pressure (40–100 psi is ideal), sanitize the system, flush the filters, and perform a final TDS reading before leaving. All work is done under local permits when required.
How often do the membranes and filters need to be replaced, and what maintenance is required?
Pre- and post-carbon filters should be replaced every 6–12 months, depending on water usage and chlorine levels. The RO membrane typically lasts 2–3 years—sometimes longer if sediment and chlorine are well controlled. We recommend an annual service visit that includes: ◾ filter changes ◾ sanitizing the storage tank ◾ checking pressure in the tank’s air bladder (7–8 psi when empty) ◾ inspecting fittings for leaks. You can monitor system performance with a simple handheld TDS meter; if rejection rates fall below 80%, it’s time for a membrane change.
What contaminants can a properly maintained RO system remove from Benton municipal or well water?
Certified RO membranes reduce arsenic, chromium, lead, copper, fluoride, nitrates/nitrites, PFAS, pesticides, sodium, sulfate, and up to 99.9 % of bacteria and cysts (e.g., Giardia, Cryptosporidium). Carbon stages also adsorb chlorine, chloramine, VOCs, and trihalomethanes that affect taste and odor. For well owners, RO is an effective barrier against high hardness and iron when paired with a pre-softener or iron filter.
How much does a complete reverse-osmosis drinking station cost and what financing or warranty options are available?
A professionally installed 4–5 stage under-sink RO system in Benton typically ranges from $525 to $850, including the first year of filters. Larger point-of-entry or high-capacity commercial setups start around $1,800. We offer 0% financing for qualified customers, a 1-year labor warranty, and manufacturer warranties of 3–5 years on tanks and components. Our maintenance plan (about $135 per year) covers all filter changes, performance testing, and priority service calls.